Peerless-AV PRG-EXC - Installation - Manual (Page 9)

9 of 14 ISSUED: 04-24-08 SHEET #: 055-9257-8 10-28-13
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112
Installing Projector Mount
CEILING INSTALLATION
KK
F
KK
F
EE
GG
GG
FF
ARROW
INDICATES
FRONT OF
MOUNT
ARROW
INDICATES
FRONT OF
MOUNT
fi g. 4.1
fi g. 4.2
WALL INSTALLATION
(EXCEPT FOR PRG-EXC MODELS)
Installing PRG projector mount with ceiling installation: Attach vertical mounting plate (EE) to PRG projector
mount (A) using two M5 x 16 mm socket pin screws (GG), four 1/4" washers (F) and two locknuts (KK) as shown
in fi gure 4.1.
Installing PRG projector mount with wall installation: Position PRG projector mount (A) to the orientation
shown in fi gure 4.2 and attach to horizontal mounting plate (FF) using two M5 x 16 mm socket pin screws (GG),
four 1/4" washers (F) and two locknuts (KK).
NOTE:
Placing washer (F) and nut (KK) combination on inside of PRG projector mount fi rst while attaching
mounting bracket (EE or FF) can make installation easier as shown in fi gure 4.3.
A
A
fi g. 5.2
CC
EE
ARROW
INDICATES
FRONT OF
MOUNT
JJ
EE
CC
A
F
F
Ceiling installation: Insert vertical mounting plate (EE) into inner channel (CC) with PRG projector mount (A) in
the correct orientation shown in fi gure 5.1. Secure vertical mounting plate to inner channel using four M5 x 10 mm
socket pin screws (JJ) as shown in fi gure 5.2.
CEILING INSTALLATION
fi g. 5.1
PLACE WASHER (F) AND NUT
(KK) COMBINATION FIRST
KK
F A
fi g. 4.3
4
5