American Car Craft Camaro Inner Fender Covers Perforated Deluxe 7Pc w_Fuse Box Cover 2011-2013 (Includes ZL1) - Manual (Page 3)

5. The last thing to do will be to set the fuse box cover plate into position over the box to determine its position. Before
you permanently stick the cover in place hold it to the fuse box cover and release the cover from the fuse panel opening
it and closing it to make sure the new cover sits back far enough to allow you to operate the door without binding on the
new fender cover and or the new radiator support cover if you are planning to install one. Once you have a good idea
about how it will sit scrub the top of the factory cover with alcohol and then swipe the cover with the adhesive
promoter provided. Allow a few seconds to dry and then peel the release liner from the 4 attachment cookies on the
underside of the new cover and carefully set it into the correct position pressing firmly to set.
Remove the protective liner to finish the installation.
If you have any questions during installation, please call American Car Craft at 727.861.1500.
Thank you and enjoy your purchase!
American Car Craft LLC
18924 Sakera Rd Hudson, FL. 34667
Ph 727.861.1500 Fax 727.861.1520
www.americancarcraft.com