beautypg.com

American Car Craft Corvette Hood Vent Grilles Laser Mesh Blakk Stealth 2006-2013 Z06+GS+ZR1 User Manual

American Car Craft For the car

background image


AMERICAN CAR CRAFT INSTRUCTIONS

C6 (ZO6) STAINLESS LASER MESH HOOD VENT GRILLE(BLACK STEALTH

PART#042099

PARTS INCLUDED:
1-Stainless Lash Mesh Hood Vent Grille w/attachment tape
1-Adhesive Promoter Pack

1. Carefully remove the black factory hood vent grille bezel from the hood opening.

The factory hood vent bezel simply snaps in place however it does have a small
square of double face attachment tape securing the bezel from flying out at high
speeds. This tape will have to be removed from the factory bezel and replaced
with fresh attachment tape provided. Simply rub the square of tape off with thumb
then swipe the area once with the adhesive promoter provided. Then set the new
piece of tape into position and press firmly to set.

2. Prepare the surface of the factory grille that you exposed behind the bezel by

scrubbing it first with household rubbing alcohol to remove any dirt then swipe
the area once with the adhesive promoter provided.