American Car Craft Corvette Fuel Rail Covers Replacement Style w_Cap Cover 1999-2004 C5 & Z06 - Manual (Page 2)

rail bracket you just installed. The new covers are designed to make use of the two lower factory perches of the
stock cover. Simply align the new cover with these two perches and then roll the cover over to the Velcro
bracket. Once you have achieved a nice fitting shape peel the Velcro half to expose the adhesive and then install
the new cover pressing along the Velcro area. Remove the cover so that you can directly and firmly press the
Velcro half to the cover to achieve a nice bond. Then rest the cover and remove the protective liner. Install the
fuel line by simply pushing it over the receiver until it clicks on then pull it gently to make sure it is attached.
When it ever becomes time to remove the fuel rail you can detach the cover enough to expose the fuel line then
use the removal tool to release the line.
If you have any questions please call American Car Craft.
American Car Craft LLC
18924 Sakera Rd Hudson, FL. 34667
Ph 727.861.1500 Fax 727.861.1520
www.americancarcraft.com