American Car Craft Corvette Tribal Skulls w_Blackout Kit 8Pc 2005-2013 C6 all - Manual (Page 2)

4. Once you are satisfied with the fit of each lens simply peel the red liner from
the back of the cover and carefully place each cover into position making
sure that your lines are all equally placed horizontally (SEE PICTURE)
pressing firmly at the sides ONLY. Doing this will set your new covers to the
molding strip installed earlier. NOTE: Although the back of your covers are
fully taped they are designed to mount to the left and right side of the
molding strip ONLY! DO NOT ATTEMPT TO PUSH IN THE CENTERS
or the top and bottom of the lens as this will distort the final installation!
5. REPLACEMENT KIT INCLUDED: We have provided you with a
replacement kit should you ever need to change one of your light bulbs use
this kit to reinstall your lens cover!
If any questions occur during installation please contact American Car Craft at
727 861-1500. Thank you and enjoy your purchase!
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520
www.americancarcraft.com