American Car Craft Camaro Firewall Brushed V6 & V8 2010-2013 User Manual
American car craft instructions
AMERICAN CAR CRAFT INSTRUCTIONS
CAMARO POLISHED FIREWALL
PART#103029
(Brushed shown)
Parts Included:
1x Stainless False Firewall
1x Stainless Line Cap
4x Chrome Retainer Caps
8x Long Zip Ties
Introduction: This unique accessory has been designed to mount over four factory firewall pad retainer studs
providing a quick and easy conversion. The firewall is installable in two ways. The first being for the stock 1SS
& 2SS engine set ups and will require very little preparation for installation and your kit will contain a small self
stick plate to cap off the brake line area. The second will work fine for the stock set up but will contain a larger
opening for the re routing of water hoses and fuel line at the passenger side. This application would be for the
upgraded engine dress up accessories.
Liner Information: Your new accessories will come to you with a protective surface liner. Leave this liner in
place until the installation is complete to prevent finger prints and or possible scratches during installation.