American Car Craft Corvette Side Graphic Sport Fade - Black Flame 2005-2013 C6 all - Manual

AMERICAN CAR CRAFT INSTRUCTIONS
BLACK FLAME SPORT FADE GRAPHIC
PART#042029
PROFESSIONAL INSTALLATION RECOMMENDED
Finally a “true air brushed flame” graphic for you car, for years graphic manufactures
have been assimilating air brushed art on their computers only to achieve very generic
looking imitations of the real thing. This graphic has been beautifully air brushed by
“Jaymz Air Studios of Florida” and has been enhanced and replicated with all its true
values by American Car Crafts design studio to bring to you a truly awesome air brushed
flame graphic specifically designed for you C6 Corvette. The graphic has been digitally
printed and laminated using the finest vehicle wrap technologies and has a 7-10 year
exterior life. Simply wash and wax with the rest of your car for years of enjoyment.
You will need:
Spray bottle
Household snap knife
Lint fee cloth or paper towels (Bounty)
Wax removing cleaning agent
1. Prepare a solution of 2-3 drops of dish soap or baby shampoo and fill the
bottle with water. Shake to mix. NOTE: You must work with very clean
hands.
2. Begin by preparing the entire door and partial fender area by first washing
with soap and water. Then using a wax and silicone remover. These cleaning
agents can be found at your local auto parts store, look for 3M wax and
silicone remover or a spray can of bug and tar remover. Either one of these
will work well.
3. Once surface area has been treated wipe off any remaining residue with a
clean lint free cloth or Bounty paper towel.