beautypg.com

American Car Craft Corvette Plenum Cover Perforated 2005-2013 C6+GS+Z06 User Manual

Page 2

background image

4. Next apply the Velcro hook strips along the inside edge of the tape you just

placed (the hook strips will be under your new plenum cover) and press
firmly to set. Remove the masking tape.


5. Now you can install the new cover by simply pressing into position. It may be

necessary to slightly lift and nudge the new cover in order to achieve a nice
straight fit.


INSTALLATION TIP: Although this procedure should not be necessary with a
clean and proper installation you may apply 2 or 3 rivets thru the hook side of
the Velcro into your factory fuel rails on both sides to insure that the Velcro
stays in place.


If any questions occur during installation, please contact American Car Craft at 727

861-1500.

Thank you and enjoy your new purchase.

Note: Care must be taken when cleaning your cover. It is a good idea to lightly dust
your cover with a clean soft cloth first in order to prevent any particles from
scratching it. Then wipe (using a new clean soft cloth) with a good quality streak
free glass cleaner.

AMERICAN CAR CRAFT

18924 SAKERA RD HUDSON FL 34667

Phone: 727 861-1500 Fax: 727 861-1520

www.americancarcraft.com