beautypg.com

American Car Craft Hummer H2 Door Guards Brushed Front & Rear 4Pc 2003-2007 User Manual

Page 3

background image

the adhesive promoter (provided) swipe the very top edge of the door
pocket all the way across and allow to dry for a few seconds. Take one
length of molding and begin at one side of the door pocket by pulling the
red release liner from the edge of the trim while applying the trim to the top
of the door pocket rim. Firmly pressing to set as you pull the red liner
along all the way to the opposite end. Trim away any excess. TECH
NOTE: In order to have the trim conform nicely to the corners you may
want to pre-bend the trim so that it takes the shape of the corner without
forcing. Once this is done firmly press into position to set.

8. Then repeat above steps for the other door or doors.


Note: Care must be taken when cleaning your door guards. It is a good
idea to lightly dust your door guards with a clean soft cloth first in order to
prevent any particles from scratching them. Then wipe (using a new clean
soft cloth) with a good quality streak free glass cleaner.


FRONT REAR

If any questions or problems occur during installation, please contact American Car Craft

at 727-861-1500.

Thank You and Enjoy Your Purchase!


AMERICAN CAR CRAFT

18924 SAKERA RD HUDSON FL 34667

Phone: 727 861-1500 Fax: 727 861-1520

www.americancarcraft.com