American Car Craft Corvette Hood Accent 3Pc Kit Polished 1997-2004 C5 & Z06 - Manual

AMERICAN CAR CRAFT INSTRUCTIONS
C5 CORVETTE HOOD ACCENT KIT
PART#033006
ITEMS NEEDED: PARTS INCLUDED:
Household Clear Silicone Adhesive Promoter
Isopropyl Alcohol 3 Stainless Panels
Household Lacquer Thinner
1. Remove the stock fiberglass heat shield.
NOTICE: 1” inch ridge forming the perimeter of the three sections where
panels will be installed.
2. Thoroughly scrub area where panels will be installed with household Isopropyl
alcohol. This will clean any dirt/residue that might affect the red attachment tape
from sticking properly.
3. Apply adhesive promoter pads (provided) around the perimeter of three areas
where hood panels will be installed.
NOTE: The promoter pads help the panels to stay adhered to surface.
IMPORTANT: Pay close attention to fit and shape of panels. It may be
necessary to bend the panels a little in order to form a comfortable and