American Car Craft Corvette Fender Trim Plates 4Pc Polished 2010-2013 Grand Sport Only - Manual

AMERICAN CAR CRAFT INSTRUCTIONS
C6 GRAND SPORT POLISHED FENDER TRIM PLATES
PART #042084
PARTS INCLUDED:
2 x Adhesive Promoter Packs
4 x Stainless Trim Plates
4 x Pre cut Molding Strips (optional)
Liner Information: Your new accessories will come to you with a protective surface liner. Leave this liner in place until
the installation is complete to prevent finger prints and or possible scratches during installation.
Although your panels come to you are shaped it is absolutely imperative that you shape the panel further by hand so
that they match the vehicle contour perfectly before being permanently attached, doing this will prevent any possibility
of the panels popping out of place long term.
1. Thoroughly scrub clean the painted surface with alcohol to remove any and all road grime and dirt. Test that you
have achieved this by applying a strip of masking tape to see if the tape sticks well .if it doesn't repeat the
procedure until it does. Once you have achieved a nice clean bondable surface apply the adhesive promoter
provided in your kit. This chemical is not a cleaner but an adhesive accelerator and must be used to insure a long
term bond. Apply one thin and complete swipe to the painted surface.