beautypg.com

American Car Craft Corvette Door Guards Brushed 2Pc 2005-2013 C6 User Manual

Page 3

background image

the door it should lay flat and conform to the shape of the door
without forcing it
. (In other words it should look like it is installed
and not be protruding from the door panel in any way). Please refer
to the pictures at the end of
these instructions. Make note of its
position. NOTE: Be sure that the points tuck into the door panel and
do not protrude. PLEASE NOTE: Metal will not bend out of place itself
so if it is properly formed and installed the panels will remain in
place.


5. Remove the red liner (be sure not to touch the adhesive) and

carefully reposition the door guard, press firmly on the panel to set.


6. Remove protective liner. Then repeat steps 1-7 for the other door.


If any questions occur during installation please contact American Car
Craft @ 727-861-1500.

Thank you and enjoy your purchase!

Note: Care must be taken when cleaning your door guards. It is a good
idea to lightly dust your door guards with a clean soft cloth first in order
to prevent any particles from scratching them. Then wipe (using a new
clean soft cloth) with a good quality streak free glass cleaner.

This is how your installed panels are designed to fit on your door panel.


American Car Craft LLC

18924 Sakera Rd Hudson, FL. 34667

Ph 727.861.1500 Fax 727.861.1520

www.americancarcraft.com