beautypg.com

American Car Craft Corvette Air Tube Cover Polished Component 2008-2013 C6+Z06+GS User Manual

American Car Craft For the car

background image


AMERICAN CAR CRAFT INSTRUCTIONS

C6 Z06 or 2008 CORVETTE STOCK AIR TUBE COVER

Part #043040

patent pending


Items Included:
_1- 2pc Stainless Air Tube Cover
_1- Pack of Adhesive Promoter
_2- Self Tapping Washer Head Screws
_2- 1 5/8

”Washer Head Screws

_2- White Sockets Large
_2- Large Chrome Cap Covers
_2-

1” Chrome Cap Covers w/Butyl Putty


Your new cover comes to you with a protective liner. Do not remove liner
until prompted by the instructions.

1. Your new two piece cover comes to you pre-shaped however it will be necessary

to further shape and form each piece by hand in order to achieve a nice snug
contoured fit.


2. Thoroughly clean the entire air tube with household isopropyl alcohol to remove

any dirt and grime. Then swipe the area once above the factory emblem with the
adhesive promoter provided.


3. Remove the top of the air tube stud retainer ONLY NOT THE ENTIRE STUD.

This will expose a small hole at the top of each stud.


4. Peel the red release liner from the back of the smaller cover and carefully place it

onto the factory air tube above the factory emblem. Press firmly at all points to
set.