Dual Electronics XDMA6540 - Manual (Page 10)

10
XDMA6540 OPERATION
Bluetooth™ Menu
iPod Menu
Menu Function Options
Bluetooth Enables/disables Bluetooth functionality.
Auto Answer
Answers all incoming calls automatically without requiring a button press.
• On: Automatically accepts all incoming calls after 2-3 rings without pressing the TALK
button.
• Off: Incoming calls can be accepted by pressing the TALK button, or refused by pressing
the END button. (default)
Auto Connect
Connects the most recently paired Bluetooth device automatically.
• On: Connects automatically when the XDMA6540 is powered on and the Bluetooth device
is in range. (default)
• Off: Will not connect to any Bluetooth device unless you manually select the device from
the "paired devices" menu.
Speaker Output Directs the Bluetooth audio to only the front speakers (default) or to all four speakers.
Menu Function Options
iPod Control
Switches the control between the head unit and the iPod/iPhone device.
• Full: Enables total control of the iPod device from the XDMA6540. (default)
• Manual: Releases the control of the iPod device. Music searches and track selections
must be done from the device. The iPod device will continue to charge.
SiriusXM Tuner Menu
When the optional SiriusXM Satellite Radio tuner (sold separately) is connected, the
following additional menu options will appear in the Setup Menu.
Menu Function Options
Parental Control
(default code: 0000)
Press SELECT to enter the Parental Control menu. This menu is locked by a 4 digit code,
and a prompt will appear to enter the code. Unless changed using the Edit Code menu (see
below), the default code is "0000". Enter this code using one of these two methods:
• Enter "0000" using the remote control, by pressing the numbers directly. Press SELECT
to confirm.
• Turn the volume knob to select the first digit, then press SELECT. Continue with the
remaining digits until the code is entered.
Once the code is entered, choose from the below menu options:
Edit Code: Choose this option to program a new 4-digit code. Enter the new code using the
input method described above.
Channel Lock: Once selected, the channel list will appear. Turn the volume knob to cycle
through the list of channels. Press SELECT to lock the desired channel; a locked channel
will not be available in the channel lineup. A lock icon will appear next to the channel
name when the channel is locked. Pressing SELECT on a locked channel will unlock it.
Clear All: Choose this option to reset the locked channels back to the factory default. All
currently subscribed channels will be unlocked.
Delete All Tags
Press SELECT to erase all Tags that are saved in memory. (Does not affect Tags that have
been transferred to an iPod device.)
Setup Menu