B&B Electronics 851-12724 - Datasheet - Manual

800-624-1070 www.imcnetworks.com
M
edia
C
onversion
Features and Benefits
Modules meet a variety of installation
requirements
• Supports Ethernet, Fast Ethernet, and
Gigabit Ethernet, and up to OC-3 for
mode converters
• Available for multi-mode or single-mode
fiber with ST or SC fiber connectors
• Supports very long fiber distances
A variety of chassis options
• Table-top or rackmountable
• 1-, 4-, 8- and 12-slot chassis
• 12-slot chassis is only 1U high
• AC power
Maximizes network uptime
• Modular, hot-swappable architecture
reduces operational costs associated
with product installation, upgrades and
maintenance
Eases Troubleshooting
• LinkLoss and FiberAlert features assist
in diagnosing problems on fiber optic
networks
Ethernet-based, Modular Media Converters (McPIM, McLIM & McGigabit)
Mc Modules for MediaConverter
Chassis Series
The MediaConverter Series is a cost-effective solution for extending the
life of legacy equipment and bringing fiber to the desktop.
Your network is growing and many new access points, workstations,
etc. are required. However, legacy equipment, along with your
existing wiring infrastructure, must work with any new equipment
you implement in your network. When copper-to-fiber, copper-to-
coax or fiber-to-fiber conversions are required, along with advanced
troubleshooting features, our MediaConverter Series is the perfect
solution.
IMC Networks’ MediaConverter Series enables you to easily and
cost-effectively connect one type of media to other dissimilar media
or networking products. This series increases the functionality and
extends the productive life of both your legacy cabling infrastructure
and networking equipment when adding fiber to your network.
The MediaConverter series includes:
MediaConverter Chassis:
• 1, 4, 8 and 12-slot varieties
MediaConverter Modules:
• McPIM:
- One 10 Mbps twisted pair port with an RJ-45 connector
- One 10 Mbps fiber port with ST or SC connector(s)
• McLIM:
- One 100 twisted pair port with an RJ-45 connector
- One 100 Mbps fiber port with ST or SC connector(s)
• Switching McLIM TP-TX/FX:
- One 10/100 twisted pair port with an RJ-45 connector
- One 100 Mbps fiber port with ST or SC connector(s)
- Plug-and-play operation
• McGigabit:
- One 1000 Mbps twisted pair port with an RJ-45 connector
- One 1000 Mbps fiber port with SC connector(s).
- Plug-and-play operation
RoHS
Compliant