B&B Electronics EKI-6311GN-EU - Datasheet - Manual

www.advantech.com/products Online Download
Features
EKI-6311GN
Specifications
Standard Support
ƒ Wireless IEEE802.11b/g/n
ƒ Ethernet IEEE802.3u MDI / MDIX 10/100 Fast Ethernet
ƒ LAN IEEE802.11b/g wireless LAN interface
IEEE 802.11n wireless LAN standard
Passive 12V PoE, max. distance: 50 meters
ƒ Certifications US FCC Part 15 Class B & C & E
Europe ETSI 300 328, ETSI 301 489-1&17,
EN 60950 compliant and CE Mark
ƒ Data Rates 802.11b 11, 5.5, 2, 1 Mbps, auto-fallback,
802.11g 54, 48, 36, 24, 18, 12, 9, 6 Mbps,
auto-fallback
ƒ 802.11n: 6M, 6.5M, 13M, 13.5M, 19.5M, 26M, 27M, 39M,
40.5M, 53M, 54M, 58.5M, 65M, 78M, 81M, 104M,
108M, 117M, 121.5M, 130M, 135M, 150Mbps
Physical Specifications
ƒ Power DC 12Volt / 1.0A; AC Adapter 100V~240V
ƒ Dimensions (L x W x H) 228 x 64 x 61 mm
ƒ Weight 500g
Environment
ƒ Operating Temp. Non Heater : -20 ~ 70° C (-4 ~ 158° F)
ƒ Storage Temperature -30 ~ 80° C (-22 ~ 176° F)
ƒ Humidity 10% ~ 95% non-condensing
Interface Operation Modes
ƒ Access Point (AP) / Customer Premise Equipment (CPE)
Antenna
ƒ Antenna Configuration 1x1 ( 1 Tx, 1 Rx)
ƒ Default embedded 8dBi directional antenna (Vertical-Pol)
ƒ Reserve N-type Connector (Plug) *Switchable by SW
ƒ Equipped N-to-RSMA adaptor and 5dBi dipole antenna for indoor AP application.
Other Features
ƒ Telnet, FTP, SNMP, Password Changes, Firmware updates, Configuration Files
ƒ Radio on/off, WMM/Regatta Mode, Output Power Control, Fragmentation Length,
Beacon Interval
ƒ RTS/CTS threshold, DTIM Interval
Modulation Techniques
ƒ 802.11n OFDM(BPSK, QPSK, 16-QAM, 64-QAM)
ƒ 802.11b DSSS (DBPSK, DQPSK, CCK)
ƒ 802.11g OFDM (BPSK, QPSK, 16-QAM, 64-QAM)
Channel Support
ƒ 802.11b/g/gn UHT20
FCC: CH1 ~ CH11; ETSI: CH1 ~ CH13
ƒ 802.11gn HT40
FCC: CH3 ~ CH9; ETSI: CH3 ~ CH11
Wireless Transmission Rates
ƒ Transmitted Power 802.11b: 26dBm
802.11g: 26dBm @ 6Mbps, 24dBm @ 54Mbps
802.11gn HT20: 26dBm @ MCS0, 22dBm@ MCS7
802.11gn HT40: 26dBm @ MCS0, 21dBm@ MCS7
Receiver Sensitivity
ƒ 802.11b Sensitivity -93dBm @ 1Mbps; -88dBm @ 11Mbps
ƒ 802.11g Sensitivity -89dBm @ 6Mbps; -73dBm @ 54Mbps
ƒ 802.11n HT20 -88dBm @ MCS0; -70dBm @ MCS7
ƒ 802.11n HT40 -84dBm @ MCS0; -67dBm @ MCS7
Ordering Information
ƒ EKI-6311GN 802.11 b/g/n Wireless Access Point/Client Bridge(US)
ƒ EKI-6311GN-EU 802.11 b/g/n Wireless Access Point/Client Bridge(EU)
Introduction
EKI-6311GN is a feature rich wireless AP/ CPE which provides a reliable wireless connectivity for industrial environments. The PoE injector enhances flexibility in deployment of this
AP/ CPE even where the DC power supply is hard to fulfill. As an 802.11n compliant device, EKI-6311GN provides 3 times higher data rates than legacy 802.11g devices. With the
support of STP, WMM and IGMP snooping protocols, EKI-6311GN effectively improves the reliability of wireless connectivity, especially in applications that need high reliability and
high throughput data transmission. To secure wireless connections, EKI-6311GN encrypts data through 64/128/152-bit WEP data encryption and also supports WPA2/WPA/802.1x
for powerful security authentication.
ƒ Compliant with IEEE802.11b/g/n
ƒ IP55 waterproof certification
ƒ Embedded 8dBi directional antenna with external N-type connector for
optional antenna
ƒ High output power 600mW
ƒ Passive 12V PoE
ƒ Support distances up to 5Km
ƒ WEP/WPA/WPA2/ IEEE 802.1 x authentication support
ƒ Spanning Tree and IGMP snooping protocol support
IEEE 802.11 b/g/n Wireless
Access Point/Client Bridge
NEW
RoHS
COMPLIANT
2002/95/EC