B&B Electronics ENQxxxxxxxx - Datasheet - Manual (Page 4)

Physical Media
Physical Media
www.rjlnxx.com 1-800-225-7724 © Woodhead L.P. 2002 All rights reserved. DW200207
Field Attachable Connector
Part Number Description
ENSAM315 Field attachable RJ-45 connector, 2.5 - 6.5mm
acceptable cable diameter
EN84-2480-3040M 304 meters (1000 feet) of solid core cable
EN84-2481-3040M 304 meters (1000 feet) of Proplex cable
Assemble the connection in the field using a standard crimping tool, and still
enjoy the same IP67 sealed connection as the overmolded cordset. One
thousand foot bulk cable put-ups are available for both Solid Core PUR and
Proplex cable. UV stabilized versions for outdoor use can be ordered by
adding a "V" to the end of a part number
Specifications--
Solid Core Cable
Physical
Conductors #24 AWG Solid Bare Copper, 0.020” (0.510 mm)
Insulation 0.009” (0.229mm) of Cellular Polyethylene
0.04” (1.0mm) nominal diameter
Pair
2 insulated conductors twisted together, lay lengths
varied between pairs to minimize cross talk
Core 4 pairs cabled together
Binder Polyester tape, minimum 20% overlay minimum
Shield Aluminum/Polyester tape, 20% overlay minimum
Drain Wire #24 AWG stranded (7/32) tin plated copper
Jacket Black Polyurethane 0.025” (0.635 mm) nominal
thickness
Operating Temperature
-20 to 80 C
Diameter 0.245” (6.223mm) nominal
Wiring Sequence Choice of TIA/EIA 568A or 10 Base-T
Electrical @ 20 C
Capacitance 5.6 nF/100 meter, maximum
Velocity of Propagation 72% nominal
Conductor DC Resistance 9.38W /100 meter, maximum
Impedance 100W ± 15W
Delay Skew 45 nS/100 meter, maximum
TIA/EIA Rating Category 5e
Frequency Attenuation NEXT
(MHz) (db/100 M nominal) (db nominal)
1 2.0 65.3
4 4.1 56.3
10 6.5 50.3
16 8.2 47.3
20 9.3 45.8
31.25 11.7 42.9
62.5 17.0 38.4
100 22.0 35.3
Specifications--
Kelvar Wrapped Cable
Physical
Conductors #26 AWG Stranded Bare Copper
Insulation Color coded HFFR, halogen free, 0.035”
(0.90 mm) nominal diameter
Pair
Cabled w/Kevlar strength member and tape wrapped
Core 4 pairs cabled together
Shield Inner - Aluminum mylar, 100% coverage
Outer - Tinned copper braid, 80% coverage
Jacket
Black Urethane 0.059” (1.5 mm) nominal thickness
Operating Temperature -70 C to 105 C
Diameter 0.287” (7.3 mm) nominal
Wiring Sequence Choice of TIA/EIA 568A or 10 Base-T
Electrical @ 20 C
Capacitance 4.6 nF/100 meters
Propagation Delay 5.2 ns/m maximum
Conductor DC Resistance 15W /100 meter, maximum
Impedance 100W ± 15W
Delay Skew 20 nS/100 meter typical, 25 nS/100 meter,
maximum
TIA/EIA Rating
Category 5
Frequency Attenuation NEXT
(MHz) (db/100 M nominal) (db nominal)
1 3.15 62
4 6.45 53
16 12.3 44
20 13.8 42
31.25 17.7 40
62.5 25.6 35
100 33.0 32
Specifications--
Stranded Cable
Physical
Conductors #24 AWG Stranded Tinned Copper
Insulation Polyolefin 0.037” (0.94 mm) nominal diameter
Pair 2 insulated conductors twisted together, lay lengths
varied between pairs to minimize cross talk
Core 4 pairs cabled together
Binder Polyester tape, minimum 20% overlay minimum
Jacket Black PVC 0.025” (0.635 mm) nominal thickness
Operating Temperature -20 to 80 C
Diameter 0.220” (5.588 mm) nominal
Wiring Sequence Choice of TIA/EIA 568A or 10 Base-T
Electrical @ 20 C
Capacitance 15 pF/FT
Velocity of Propagation 70% nominal
Conductor DC Resistance 9.0W /100 meter, maximum
Impedance 100W ± 15W
Delay Skew 10 nS/100 meter typical,
25 nS/100 meter max
TIA/EIA Rating
Category 5e
Frequency Attenuation NEXT
(MHz) (db/100 M nominal) (db nominal)
1 1.9 76
4 3.9 72
16 7.9 61
20 9.0 60
31.25 11.0 55
62.5 15.9 53
100 20.7 50
Media Converters
Part Number Description
ENMC2R1S Media Converter, 2 copper (RJ-45) ports, 1 multi-
mode fiber (SC) port
While fiber optic cable is an attractive option in many "non-office" networks,
due to its immunity to electrical noise and ability to traverse longer distances
(2Km) than copper cable, it may not be cost effective to have all devices on the
network support fiber. The RJ-Lnxx Media Converter enables a fiber backbone
to be run to the industrial enclosure, providing a link to your copper network.
This DIN rail mount unit provides 1 Fiber (SC) and two copper (RJ-45) ports,
and is designed to withstand temperature and vibration extremes
2.30" REF
[58.4mm]
2.00" REF
[50.8mm]
1.12" REF
[28.4mm]
O.D. CABLE RANGE
.10"-.26" [2.5mm-6.5mm]
Specifications--
Copper Ports Shielded RJ-45, 10/100BaseT(x) autonegotiate
Fiber Port Multi-Mode SC, 100BaseFX, 1300 nm center
Supply Voltage 10 – 30 VDC
Operating Temp -40 C to 85 C
Vibration IEC 68-2-6
Hazardous Locations UL 1604, CSA C22.2/213
(Class 1, Div. 2)
Electrical Safety
UL 508, CSA 22/14, CE
EMI Emissions FCC part 15, Class B, CE
EMI Immunity EN613216-1, CE
Dimensions 4.75" (120.7 mm) x 3.17" (80.5 mm)
x 1.10" (27.9 mm)