B&B Electronics ADAM-6022 - Datasheet - Manual

ADAM-6022 - 0704 - 1/1
International Headquarters:
707 Dayton Road P.O. Box 1040 Ottawa, IL 61350 USA
815-433-5100 Fax 433-5104 www.bb-elec.com [email protected] [email protected]
Westlink Commercial Park Oranmore Co. Galway Ireland
+353 91 792444 Fax +353 91 792445 www.bb-europe.com [email protected] [email protected]
Integrate – Expand – Simplify
B&B ELECTRONICS
PRODUCT INFORMATION
Model ADAM-6022
Easy System Configuration
Anywhere at Anytime
through a Standard Web Browser
Ethernet-enabled Dual-loop PID Controller
Overview
The ADAM-6022 is an Ethernet-enabled dual-loop PID controller for general purpose PID control applications. A user-
friendly utility software is included to set PID parameters (Pv, Mv, & Sv). Through the integrated web page, users can
monitor and change the control set point through the Internet via web browser. It also supports MODBUS/TCP protocol.
HMI software can easily access this module to monitor the I/O data and change the control parameters.
Features
• 2 loop PID control algorithms built in one package
• 3 analog input/1 analog output/1 digital input/1digital alarm output for 1 PID loop
• Support multiple analog I/O ranges: 0 ~ 10 VDC, 0 ~ 20 mA and 4 ~ 20 mA
• Support heating/cooling (direct/reverse) action mode
• Support loop open/close (PID disable/enable) and analog output manual control modes
• Built-in
watchdog timer
• Built-in digital input for system emergency shutdown
• Built-in web server
• MODBUS/TCP protocol support
Built-in PID Control Algorithms
The ADAM-6022 has been built with 2 PID control loop inside
module. There are three analog inputs one analog output, one
digital input and one digital output as control parameter I/O for
each loop. For the three analog input signal, AI#1 is for Pv1,
AI#2 is for Pv2 and AI#3 is for the feedback of Mv. The analog
output signal is for the Mv output value. Digital input would be
used for the emergency shutdown input signal, it can remotely
stop the PID loop action while an emergency situation arises.
One digital output is designed as the alarm output, while analog
input/output signal value over limitation announces the user to
take action.
Built-in Watchdog Timer
The watchdog timer is designed to automatically reset the CPU
when the system fails.
Easy System Configuration with a
Standard Web Browser
ADAM-6022 can be configured through the ADAM Ethernet
Utility software. It also supports a web server function, and has
a built-in web-based configuration utility that allows users to
configure the system profile from anywhere at anytime through
a standard web browser, like Microsoft Internet Explorer or
Netscape.
Ordering Information
Model #: Description:
ADAM-6022 ................................... Ethernet-enabled Dual-loop PID Controller