B&B Electronics 9000BP - Datasheet - Manual (Page 2)

9000 Series Industrial Ethernet Switch Ordering Information
9000BP 5 Slot Backplane
9000CPU CPU Module
9002CPU-SX CPU Module with Two Multimode GB Fiber Optic Ports
9002CPU-LX-ZZ CPU Module with Two Singlemode GB Fiber Optic Ports
9006TX Six Port 10/100BaseTX Copper Module
9002FXE-XX-YY Two Port 100BaseFX Fiber Ports
9004FXE-XX-YY Four Port 100BaseFX Fiber Ports
Where: ZZ = 10, 40, 70 for GB Singlemode
E = Singlemode, and Blank Otherwise
XX = ST or SC, YY = 15, 40, or 80 for Singlemode, Blank for Multimode
9000 Specifi cations
Switch Properties
Number of MAC Addresses: 4,096
Aging Time:
Programmable
Latency Typical: 2.9 μs
Backplane Speed : 6.6 Gb/s
Switching Method : Store-and-Forward
Case Dimensions
Height:
5.12" (13.0cm)
Width: 9.0" (22.8cm)
Depth: 5.6" (14.2cm)
Weight (max): ~ 5 lbs (2.3kg)
DIN-Rail Mount: 35mm
Electrical
Redundant Input Voltage:
10-30 VDC
Input Current (max): 2.5A@24V (fully populated)
Inrush @ 24V: 16.0 Amp for 7.5ms
N-TRON Power Supply: NTPS-24-5 (5 Amp@24V)
Environmental
Operating Temperature: -20
o C to 70 o C
Storage Temperature: -40 o C to 85 o C
Operating Humidity: 10% to 95%
(Non Condensing)
Operating Altitude: 0 to 10,000 ft.
Shock and Vibration (bulkhead mounted)
Shock:
200g @ 10ms
Vibration/Seismic: 50g, 5-200Hz, Triaxial
Reliability
MTBF:
>1 Million Hours
Network Media
10BaseT: >Cat3
Cable
100BaseTX: >Cat5 Cable
100BaseFX, 1000BaseSX
Multimode:
50-62.5/125μm
100BaseFXE, 1000BaseLX
Singlemode:
7-10/125μm
THE INDUSTRIAL NETWORK COMPANY
100 Mb Fiber Transceiver Characteristics
* Multimode Fiber Optic Cable
** Singlemode Fiber Optic Cable
Fiber Length 2km* 15km** 40km** 80km**
TX Power Min -19dBm -15dBm -5dBm -5dBm
RX Sensitivity Max -32dBm -29dBm -34dBm -34dBm
Wavelength 1310nm 1310nm 1310nm 1550nm
SFP Gigabit Fiber Transceiver Characteristics
* SX Fiber Optic Cable
** LX Fiber Optic Cable
Fiber Length
550m for 50/125μm*
300m for 62.5/125μm*
10km** 40km** 70km**
TX Power Min -9.5dBm -5dBm -4dBm -3dBm
RX Sensitivity Max -17dBm -20dBm -21dBm -23dBm
Wavelength 850nm 1310nm 1310nm 1550nm
Assumed Fiber Loss -3.5 to -3.75 dB/km -0.5 dB/km -0.25dB/km -0.20dB/km
Laser Type VCSEL FP DFB DFB
Connectors
10/100BaseTX:
Up to Twenty-four RJ-45 Copper
Ports
100BaseFX:
Up to Sixteen SC or ST Fiber Ports
1000BaseSX/LXE: Up to Two LC Duplex Ports
Recommended Wiring Clearance
Front:
4" (10.16cm)
Side: 1" (2.54cm)
Regulatory Approvals
FCC Part 15 Class A,
UL Listed 1604 (US and Canada)
CLASS I, DIV 2, GROUPS A,B,C,D,T4A
CE: EN61000-6-2,4, EN55011, EN61000-4-2,3,4,5,6,
GOST-R Certifi ed, RoHS Compliant,
ABS Type Approval for Shipboard Applications,
IEEE 1613 for Electric Utility Substations,
and NEMA TS1/TS2 for Traffi c Control
® 2009 N-TRON, Corp. N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Product names mentioned herein are for identifi cation purposes only and
may be trademarks and/or registered trademarks of their respective company. Specifi cations subject to change without notice.
The responsibility for the use and application
of N-TRON products rests with the end user. N-TRON makes no warranties as to the fi tness or suitability of any N-TRON product for any specifi c application. N-TRON Corporation
shall not be liable for any damage resulting from the installation, use, or misuse of this product.
Printed in USA.
REV 090807
Contact Information
N-TRON Corp. N-TRON Europe GmbH
820 S. University Blvd., Suite 4E Alte Steinhauserstr 19
Mobile, AL 36609 USA
6330 Cham / Zg Switzerland
TEL: (251) 342-2164 TEL: +41 41 7406636
FAX: (251) 342-6353 FAX: +41 41 7406637
Website: www.n-tron.com
Email: [email protected]