B&B Electronics 849-10100 - Manual - Manual (Page 5)

2
launch power between any two inputs to the product should not exceed 17db. In
an application where the isolation factor might exceed 17db, it is recommended
that attentuators be used, in series, with relationship to the stronger input.
The diagram below illustrates the route that data will take according to the above
guidelines. Another path in the opposite direction is needed to complete this
installation.
Specifications
Environmental
Operating Temperature
32° - 104° F (0° - 40° C)
Storage Temperature
0° - 160° F (-20° - 70° C)
Humidity
5 - 95% (non-condensing)
Fiber Optic Specifications
Insertion Loss: 1.4dB @ 1550 nm, 1.5 dB @ 1300 nm (Max values)