B&B Electronics 508TX-A - Datasheet - Manual (Page 2)

508TX Industrial Ethernet Switch Ordering Information
508TX Eight 10/100BaseTX Ports
508TX-N 508TX with N-View
508TX-A 508TX with N-View and Advanced Management Features
THE INDUSTRIAL NETWORK COMPANY
508TX-A Specifi cations
Switch Properties
Number of MAC Addresses: 4,000
Aging Time:
20s, Programmable (-A)
Latency Type.: 2.1 μs
Backplane Speed: 2.6Gb/s
Switching Method:
Store & Forward
Case Dimensions
Height: 2.3"
(5.8cm)
Width: 5.9" (15cm)
Depth: 3.5" (8.8cm)
Weight: 1.6 lbs (0.8kg)
Din-Rail: 35mm
Electrical
Redundant Input Voltage:
10-30 VDC
Input Current: 200 mA@24V
Inrush: 9.0Amp/0.6ms@24V
Environmental
Operating Temperature:
-20 o C to 70 o C (Standard)
-40 o C to 85 o C (Extended)
Operating Humidity: 10% to 95%
(Non Condensing)
Operating Altitude: 0 to 10,000 ft.
Shock and Vibration (bulkhead mounting)
Shock:
200g @ 10ms
Vibration/Seismic: 50g, 5-200Hz, Triaxial
Reliability
MTBF:
>2Million Hours
Serial Confi guration Port
Com Parameters:
9600,n,8,1
Network Media
10BaseT:
>Cat3 Cable
100BaseTX: >Cat5 Cable
Connectors
10/100BaseTX:
Eight (8) RJ-45 Copper Ports
Recommended Wiring Clearance
Front:
4" (10.16 cm)
Side: 1" (2.54 cm)
Regulatory Approvals
FCC/CE (CFR 47, Part 15, Subpart B, Class A)
EMC Dir 89/336/EEC, EN 50204, EN 55011
EN61000-4-2/3/4/5/6/8/11, EN61000-6-2/4
ANSI C63.4, ICES-003
UL /cUL: Class I, Div 2, Groups A, B, C, D and T4A
UL 508 and UL 1604
CAN/CSA-C22.2 No.213, ATEX II 3 G Ex nA
ABS Type Approval for Shipboard Applications
GOST-R Certifi ed, RoHS Compliant
Designed to comply with:
IEEE 1613 for Electric Utility Substations
NEMA TS1/TS2 for Traffi c Control
REV 090804
Contact Information
N-TRON Corp. N-TRON Europe GmbH
820 S. University Blvd., Suite 4E Alte Steinhauserstr 19
Mobile, AL36609USA 6330 Cham / Zg Switzerland
TEL: (251) 342-2164 TEL: +41 41 7406636
FAX: (251) 342-6353 FAX: +41 41 7406637
Website: www.n-tron.com
Email: [email protected]
® 2009 N-TRON, Corp., N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Product names mentioned herein are for identifi cation purposes only and
may be trademarks and/or registered trademarks of their respective company. Specifi cations subject to change without notice.
The responsibility for the use and application
of N-TRON products rests with the end user. N-TRON makes no warranties as to the fi tness or suitability of any N-TRON product for any specifi c application. N-TRON Corporation
shall not be liable for any damage resulting from the installation, use, or misuse of this product.
Printed in USA.