Ie-modeconverter – B&B Electronics 855-19619 - Datasheet User Manual
Page 2
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
protocol-Independent, Fiber mode
conversion via sFp modules
IE-ModeConverter
SpecificationS
Technical
Two SFP ports
Protocol-independent operation
Converts between dissimilar fiber modes and wavelengths
Includes diagnostic LEDs
Hot-swappable architecture
Small Form Factor
7 VDC to 50 VDC terminal block powering option
Supports an external 5 VDC power module (not extended temperature)
Extended temperature range from -10° to +50° C
Compatible with IMC Networks SFPs and all standard MSA compliant SFP
transceivers
Supports DIN Rail mounting
DC terminal block has dual inputs and supports cascading power
Standard Compliance
SFP-MSA SFP standard (September 14, 2000)
SFF-8472 DDMI standard (Revision 1.0)
(dimensions in inches)
Mechanical
Dimensions
0.83”H x 1.80”W x 3.35”D
(2.11 x 4.57 x 8.51 cm)
Shipping Weight
0.25 lbs (0.11 kg)
ac wall adapter
100 to240 ±10% VAC input, 5 VDC output, 2A max.
dc input Voltage
+7 to +50 VDC @ 2.5 Watts (chassis grounded to negative terminal)
power
Maximum 3.3 Watts of combined power to both SFPs
enVironMental
Operating Temperature:
-13°F to +185°F (-25°C to +85°C)
DC configuration
-4°F to +158°F (-20°C to +70°C)
DIN Railmount power supply
+14°F to +122°F (-10°C to +50°C)
with AC wall adapter
Storage Temperature:
-49°F to +185°F (-45°C to +85°C)
Operating Humidity
5% to 95% (non-condensing),
0 – 10,000 ft. altitude
regulatory approVals
FCC Class A
UL/cUL, CSA, CE
mEchanIcal dIagram
1.80
.42
.96
.38
.32
.20
.20
.20
.93
.44
.34
.35
.50
1.35
.50
.06
.50
.52
.84
.35
.50
.85
.14