B&B Electronics 850-14511 - Datasheet - Manual

www
.
bb
-
elec
.
com
|
protocol-Independent, snmp-manageable Fiber
mode conversion modules
iMcV-M2MM
In today’s dynamic networks, changing requirements are a fact of life.
The multi-mode fiber products and cabling which were the most cost-
effective and sound choice for your network yesterday may no longer
give you the flexibility you require when adding remote offices today.
Easily overcome the distance limitations inherent to multi-mode fiber
by extending it with a fiber mode converter.
Extend the reach of your network without replacing multi-mode fiber
equipment. Fiber pulled within a building is typically mulit-mode. If a
network device or test equipment offers 850nm multi-mode fiber ports,
and has to connect to a 1300nm multi-mode NIC or router, a mode
converter is required.
The iMcV-M2mm fiber mode converter includes:
• Converts multi-mode to multi-mode fiber
• Supports 10 Mbps Ethernet to 155 Mbps or 1.25 Gbps
Gigabit Ethernet
Hot-swappable fiber mode conversion modules significantly reduce
operation costs by allowing other modules within the same chassis
to remain up and running during product upgrades, maintenance and
troubleshooting.
• Includes protocol-independent operation
• Converts multi-mode to multi-mode fiber
• 10 Mbps Ethernet to 155 Mbps ATM
• Supports 10 Mbps Ethernet to 155 Mbps or 1.25 Gbps
Gigabit Ethernet
product FEaturEs
ordErIng InFormatIon
Model
nuMBer
desCriPtion
Port 1
distanCe
Port 1
desCriPtion
Port 2
distanCe
Port 2
iMcv-M2MM/155 (Multi-mode to Multi-mode)
859-14803
MM1300-ST 5 km MM850-ST 2 km
859-14804 MM1300-SC 5 km MM850-SC 2 km
850-14510 MM1300-ST 2 km MM850-ST 2 km
850-14511 MM1300-SC 2 km MM850-SC 2 km
iMcV-M2MM also available in CWDM Fiber.
Call for details.
iView: Windows 2000/XP/Vista/Win7
iMcV-M2MM_3713ds