B&B Electronics DS-PCIE-100 - Manual - Manual (Page 6)

May/07 MN2000000083 6
6. Click on Close to complete the driver installation.
To Verify Windows® Driver Installation
1. Right click My Computer, then click Manage. Click Device
Manager.
2. Click on the +(plus sign) in front of Ports(COM & LPT), two
MosChip PCI Serial Port … should be displayed.
3. Double click Multifunction adapters, MosChip PCI Multi-I/O
Controller should be displayed.
Change COM Port Number
Some serial devices need a specific COM port in order to work. If your
serial devices works properly, do not change this setting.
For Windows® 2000/XP/Server 20003/Vista Installation
1. From the Device Manager window double click Ports(COM &
LPT), then double click the MosChip PCI Serial Port you want
to change.
2. Click the Settings tab and then click Advanced.
3. Click the down arrow that is next to the COM Port Number box,
select a COM port that is not in use, then click OK.