B&B Electronics APAX-5520KW - Datasheet - Manual

21-8
Programmable Automation Controllers
Features
APAX-5520KW
ƒ Onboard XScale ® PXA270 520 MHz processor
ƒ 64 MB SDRAM on board, 32 MB Flash
ƒ Expands I/O by connecting with APAX-5000 I/O modules
ƒ Combines with APAX-5570XPE/5571XPE to deliver dual CPU functionality
ƒ Supports real-time control tasks under Windows CE .NET through ProConOS
ƒ Supports IEC-61131-3 programming languages through Multiprog
ƒ 1 x CompactFlash slot for data logging
ƒ 1 x 10/100 Mbps LAN and 1 x RS-485 ports
Introduction
APAX-5520KW can operate in two different ways. APAX-5520KW can be inserted on the backplane, and control I/O modules which are stacked together. In this way, the
APAX-5520KW performs as standalone controller since it can run process program by itself. The second way is to combine APAX-5520KW and APAX-5570XPE/5571XPE to form
dual CPU architecture. Installing APAX-5520KW on the expansion slot of APAX-5570XPE/5571XPE or on the expansion backplane, the CPU of APAX-5520KW can concentrate on
the I/O control process. Since there is no other tasks bothering CPU of APAX-5520KW, its control ability can deliver the best performance, providing the real-time execution. The CPU
of the APAX-5570XPE/5571XPE controller can execute other tasks such as HMI/SCADA, recipe, database, communication with other system, data logging, etc. This architecture can
deliver more reliability to system when HMI software makes XP Embedded system hang on the the APAX-5570XPE/5571XPE controller, since APAX-5520KW will still continuously
execute its task. APAX-5520KW with industrial standard IEC 61131-3 programming tool, Multiprog KW software and stable ProConOS, makes engineers develop their applications
in shortest time and save their time-to-market.
Specifications
System Hardware
ƒ CPU XScale PXA270 520 MHz
ƒ Memory Flash 32M bytes, SDRAM 64M bytes
ƒ Battery Backup Memory 256 KB file system, 256 KB direct access
ƒ Real-time Clock Yes
ƒ Watchdog Timer Yes
ƒ VGA DB15 connector
ƒ USB Ports 1 x USB 1.1
ƒ Storage 1 x Type II CompactFlash card slot (internal)
ƒ Connected I/O Modules 32 (max.)*
ƒ Digital Signals 2048 (max.)
ƒ Analog Signals 512 (max.)
Communication (Ethernet)
ƒ LAN Ports 1 x RJ-45 Port, 10/100 Mbps
ƒ Protocol Modbus/TCP Server and Client
Communication (Serial)
ƒ Medium 1 x isolated RS-485
ƒ Maximum Nodes 32 (in RS-485 daisy-chain network)
ƒ Protocol Modbus/RTU Master and Slave
ƒ Isolation Protection 2500 V
DC
Software
ƒ Operating System Windows CE .NET
ƒ Control Software KW Multiprog (development tool)
ProConOS (runtime kernel)
General
ƒ Certifications CE, FCC class A
ƒ Dimensions (W x H x D) 30 x 139 x 100 mm
ƒ Enclosure ABS+PC
ƒ Weight 210 g
ƒ Power Consumption 4.5 W @ 24 V
DC
(typical)
Environment
ƒ Operating Temperature -10 ~ 55° C (when mounted vertically)
ƒ Storage Temperature -40 ~ 70° C
ƒ Relative Humidity 5 ~ 95% (non-condensing)
ƒ Shock Protection 20 G @ wall mount, half sine, 11 ms
(Confirms to IEC 60068-2-27)
ƒ Vibration Protection 1 Grms @ 5 ~ 500 Hz (Random, operating, 1 hr/axis)
2 G @ 5 ~ 500 Hz (Sine, non-operating, 1 hr/axis)
(Confirms to IEC 60068-2-64 and IEC 60068-2-6)
Ordering Information
ƒ APAX-5520KW Micro PAC with XScale CPU, KW
ƒ MPROG-ADV46E KW Multiprog Advanced v4.6 (64K bytes I/O)
ƒ MPROG-BAS46E KW Multiprog Basic v4.6 (128 bytes I/O)
ƒ APAX-5002 2-slot Backplane Module
ƒ APAX-5343E Power Supply for APAX Expansion Module
Micro PAC with XScale ® CPU
RoHS
COMPLIANT
2002/95/EC
*: APAX DI/O modules can use ID numbers 0 ~ 31, while AI/O modules and counter modules can only use ID numbers 0 ~ 15