B&B Electronics 9SPOP2 - Datasheet - Manual

International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
www.bb-elec.com
[email protected]
[email protected]
SpeCiFiCationS
serial teChnology
Data Rate 9600 baud rate
rs-232
Connector DB9 female (DTE)
Connector DB9 male (DCE)
Signals TD, RD
Transmission Mode Asynchronous, half or full duplex, point-to-point
Power
Source
Port Powered from both sides. DTE side - DTR & RTS lines.
DCE side - DCD, DSR & CTS lines.
Weight 0.08 lb (36.3 g)
isolation
Volts/Duration 2,500 Volts RMS isolation for 1 minute
MeChaniCal
Dimensions 6.1 x 3.3 x 1.7 cm (2.4 x 1.3 x 0.66 in)
MTBF 674717
MTBF Calc. Method Parts Count Reliability Prediction
environMental
Operating
Temperature
0 to +70 °C
Storage Temperature -55° to 125°C
Operating Humidity
0 to 95% Non-Condensing
MTBF 674717.4
MTBF Calc. Method Parts Count Reliability Protection
aPProvals / CertiFiCations - 9sPoP2
FCC Part 15, CISPR, EN 55022: 2010 + AC:2011 Class A Emissions
CE
EN 61000-6-1: 2007 Generic Standards for Residential, Commercial and
Light-Industrial Environments
EN 61000-4-2: 2009 Electro-Static Discharge (ESD)
EN 61000-4-3: 2006 +A1 +A2 +IS1 Radiated Field Immunity (RFI)
EN 61000-4-4: 2012 Electrical Fast Transients-Burst Immunity (EFT)
EN 61000-4-6: 2009 Conducted Immunity
Download complete Declaration of Conformity at www.bb.elec.com
meChaniCaL Diagram
1.7 cm
0.66 in
6.1 cm
2.4 in
3.33 cm
1.3 in
2.5 kv rS-232 optical isolator
9SPOP2
Model 9SPOP2 is a port powered two-channel isolator with a 2,500 Volt
protection level. It optically isolates both the RS-232 Transmit and Receive
data lines and RS-232 equipment from lightning surges, accidental high
voltage shorts, and ground loops. RS-232 data signals TD and RD are
supported at up to 115.2 kbps.
• 2,500V, 2-way optical isolation
• RS-232 on DB9 male and female connectors
• Port-powered on both sides, no external power
supply required
proDuCt FeatureS
orDering inFormation
Model
nuMber
Channels
ProteCted
dte
ConneCtor
dCe
ConneCtor
isolation
9SPOP2 2 DB9 Female DB9 Male 2,500 V
aCCeSSorieS
9PAMF6 - DB9 Male To DB9 Female, 1.8 m (6 ft.)
MMNM9 - Null Modem Adapter – DB9 Male / DB9 Male
232HESP - RS-232 Surge Protector
surge Protection standards
IEC 1000-4-5: 1995 “Surge Immunity Test” and IEEE C62.41-1991
“IEEE Recommended Practice on Surge Voltages in Low-Voltage AC
Power Circuits” are the recognized standards for surge protection.
B&B Electronics’ heavy duty surge protectors have been tested at 6
kV to meet these two specifications.
Learn more about surge suppression & isolation
www.bb-elec.com/TechLibrary
• “Isolation: Your Best Investment for Reliability”
• “Dataline Isolation Theory”
• “Dataline Surge Protection”
9SPOP2_3713ds