7 reading an sms, At+cmgr=
Page 76

GM862-GPS Software User Guide

1vv0300729 Rev. 5 - 05/07/07

page 76 of 120

3.5.7 Reading an SMS

A new SMS can be read with the command:

•

send command

AT+CMGR=

where:

: SMS location index

•

wait for response in the format:

Output format for received messages (the information written in italics will be present depending on
+CSDH last setting):
+CMGR: ,,,[,,,,
,,,]

Output format for sent messages:
+CMGR: ,,[,,,,,,
,,]

Output format for message delivery confirm:
+CMGR: ,,,,,,

,

where:
- status of the message
"REC UNREAD" - new received message unread
"REC READ" - received message read
"STO UNSENT" - message stored not yet sent
"STO SENT" - message stored already sent
- first octet of the message PDU
- message reference number
- arrival time of the message to the SC

- sending time of the message
- message status as coded in the PDU
- Protocol Identifier
- Data Coding Scheme
- Originator address, string type represented in the currently selected character set (see

+CSCS)

- Destination address, string type represented in the currently selected character set (see

+CSCS)

- string type alphanumeric representation of or , corresponding to an entry found

in the phonebook; used character set is the one selected with command +CSCS. NB: this
optional field is currently not supported.

- Service Centre number
,, - type of number ,,
129 - number in national format

7 reading an sms, At+cmgr= Page 76

Page 76

7 reading an sms, At+cmgr=
Page 76