Rainbow Electronics GE863-PRO3 - Manual (Page 9)

GE863-PRO
3
Product Description
80285ST10036a Rev. 1 - 08/08/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 9 of 55
• CMUX
• SAP (SIM Access Profile)
• Multisocket
From the interface point of view, the GE863-PRO
3
provides the following:
• 1 Full GSM engine RS232 UART, CMOS level (ASC0) interface for AT commands:
- Auto-bauding from 2.4 up to 57.6 Kbps
- Fixed baud rate up to 115.2 Kbps
• 1 FULL ARM9 RS232 USART, CMOS level (UART0) interface for AT command drive
• 3 Four wires ARM9 RS232 USART, CMOS level
• 2 Two wires ARM9 RS232 UART, CMOS level
• 2 ARM9 SPI interfaces for up to 18 slaves
• 1 ARM9 Image Sensor Interface ITU-B 601/656
• 1 ARM9 IIC bus
• 1 ARM9 ISO7816 T0/T1 SAM/Smartcard interface
• 1 ARM9 SD/MMC Multimedia Card Interface
• 1 ARM9 Synchronous Serial Controller ( I2S ) interface for digital audio
• 1 ARM9 Ethernet controller
• 4 ARM9 ADC with ADC trigger input
• 6 ARM9 DAC (PWM)
• 1 ARM9 USB Device port
• 2 ARM9 USB Host port
• 2 ARM9 clock output pins
• 1 ARM9 Debug Trace Serial port
• 1 ARM9 JTAG debug port
• 2 analog GSM audio path
• SIM card interface, 3 volts and 1.8 volts
• 90 ARM9 + 9 GSM GPIO ports (max)
• 1 GSM buzzer output
• 1 GSM alarm output
• 1 GSM led status output indicator
In order to meet the competitive OEM and vertical market stringent requirements, Telit supports its
customers with a dedicated Technical Support Policy with:
• Telit GE863-PRO 3 Evaluation Kit to help you to develop your application;
• a Website with all updated information available;