Rainbow Electronics GE863-PRO3 - Manual (Page 20)

GE863-PRO
3
Product Description
80285ST10036a Rev. 1 - 08/08/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 20 of 55
3.19 Call status indication
The call status indication by AT commands is supported.
3.20 Automatic answer (Voice, Data or FAX)
After a specified number of rings, the module will automatically answer. The user can set the number
of rings by means of the command ATS0=.
3.21 Supplementary services (SS)
The following supplementary services are supported:
• Call Barring,
• Call Forwarding,
• Calling Line Identification Presentation (CLIP),
• Calling Line Identification Restriction (CLIR),
• Call Waiting, other party call Waiting Indication,
• Call Hold, other party Hold / Retrieved Indication,
• Closed User Group supplementary service (CUG),
• Advice of Charge,
• Unstructured SS Mobile Originated (MO)
3.22 Acoustic signalling
The acoustic signals of Telit GE863-PRO
3
modules on the selected acoustic device are the following:
• Call waiting;
• Ringing tone;
• SMS received tone;
• Busy tone;
• Power on/off tone;
• Off Hook dial tone;
• Congestion tone;
• Connected tone;
• Call dropped;
• No service tone;
• Alarm tone.