Section 2, Setting up the sbc35-a9g20 board, Electrostatic warning – Rainbow Electronics SBC35-A9G20-C11 User Manual

Page 5: Requirements, Layout

Text mode
Original mode

ECTION

1. Setting Up the SBC35-A9G20 Board

1.1. Electrostatic Warning

The SBC35-A9G20 board is shipped in protective anti-static packaging. The board must not
be subjected to high electrostatic potentials. A grounding strap or similar protective device
should be worn when handling the board. Avoid touching the component pins or any other
metallic element.

1.2. Requirements

In order to set up the SBC35-A9G20 board, the following items are needed:

●

the SBC35-A9G20 board itself.

●

AC/DC power adapter (5V at 2A), 2.1 mm by 5.5 mm

1.3. Layout

Datasheet USG-00019-A01

5/24