Rainbow Electronics USB-A9260-C12 - Manual

Product Data Brief / USB-A9260-C0X
Specification
Processor ATMEL AT91SAM9260 @ 180MHz
Memory 256Mbytes NAND flash, 8 Bit wide
64Mbytes SDRAM, 32 Bit wide
64Kbits serial SPI EEPROM
USB A plug connector ----> FTDI FT2232D (1x USB 2.0 downstream port, full speed, 12Mbits/s), Power + JTAG + UART
USB Stacked A connector <---- AT91SAM9260 (2x USB 2.0 host port, full speed, 12Mbits/s,), Power 100 mA max / port
USB Mini B connector ----> AT91SAM9260 (1x USB 2.0 device port, full speed, 12Mbits/s)
Ethernet 1x 10/100baseTx port
Setup / Debug 1x JTAG & 1x DBGU over USB (FTDI FT2232D)
Expansion 1x 50 pins connector (I2C, SPI, USART, SSC, MCI, ISI, TC)
Bootloader U-Boot
OS Linux 2.6
Mechanical and environnemental
Board size 85 x 36 mm
Power supply voltage +5V +/-5% via USB port
Power requirement 2.5W max (300mA Core , 200mA available for USB Host Ports + Expansion connector)
Temperature 0° to 70°C standard (operating), -40° to 85°C (storage)
Humidity 5% to 95% relative humidity, non condensing
Weight 30 grs
Ordering Information
Reference Part Number Description
USB-A9260-C0X 905-00002-A0X 256Mbytes NAND, 64Mbytes SDRAM, 64Kbits EEPROM,
Full Option, 0 to 70°C
Notice : The products specifications provided in this datasheet are subject to change without notice.
© 2007 CALAO Systems – All Rights Reserved.
The CALAO Systems logo is a registered trademark of CALAO Systems.
All others names are the property of their respective owners.