TC Electronic G-Major 2 - Manual (Page 14)

13
THE DISPLAY
E
N
G
L
IS
H
Damp
When both the Noise Gate and the Compressor
are in use, the DAMP indicator will indicate the
Noise Gate attenuation while no input signal is
present and the applied compression when an
input signal is present.
Preset Number
When the digits are lit steadily, they represent
the number of the currently recalled preset.
When you scroll through G-Major 2’s presets
(called “previewing”) by using the ADJUST
wheel, the digits will blink until you recall a
preset by pressing the RECALL key.
Edited
When the “Edited” indicator is lit, the currently
recalled preset has been edited, but not yet
stored.
Factory/User
These indicators show whether you are
operating in the Factory preset bank or in the
User preset bank.
Preset types
User presets (RAM)
User presets can be edited and stored in any of
the 100 User locations.
Factory Presets (ROM)
G-Major 2 holds 100 Factory presets. Factory
presets can be edited and stored in any User
location. You cannot store presets to the
Factory preset bank, as it is “read only”
memory.
Recalling presets
Recalling a preset means loading/activating a
preset.
• Press the RECALL key to enter the RECALL
menu.
• Use the ADJUST wheel to preview presets. A
blinking preset number indicates that you
have not actually recalled the preset yet.
• Press ENTER or RECALL to recall/activate
the preset.
Press any other key at any time during
previewing to “abort mission” and return to the
currently recalled preset.
Previewing and routings:
When previewing a preset with a routing
that is different from the routing currently
used, the Routing/Matrix LEDs blink.
Editing presets
To edit preset parameters:
• Double-click the key of the effect block that
you would like to edit.
• Select the parameter to edit using the arrow
UP/DOWN keys. Change parameter values
using the ADJUST wheel.
• See the following section for instructions on
how to store a preset.
Storing presets
Storing a preset without changing its name:
• Press the STORE key.
If the preset you are about to store is a
Factory preset, G-Major 2 will suggest the
first available User preset location, but you
can select any of the 100 User preset
locations using the ADJUST wheel. If the
preset you are about to store is a User
preset, G-Major 2 suggests the current
location of the preset. You can, however,