TC Electronic MD3 TDM - Manual (Page 5)

MD3-TDM / 3
EE
NN
GG
LL
II
SS
HH
The disadvantage is that some of the lower bits are lost in the 24 bit path to the algo-
rithm. On the other hand, the same loss would happen when you would reduce the
signal via an input level parameter.
The The MD3 TDM version runs on Pro Tools|HD and Pro Tools|HD Accel hardware,
including the Venue console, at sample rates from 44.1 kHz to 96kHz, with Pro Tools
software 6.9 or higher.
TOOLTIPS
If you are just getting started with the MD3 Stereo Mastering Package and you want to
know what all the parameters do, press the question mark Icon to activate the tooltip
function.When activated, moving the mouse over the different parameters will display
information about the parameter functionality. Of course you can disable the tooltips,
as soon as you know your way around.
SYSTEM REQUIREMENTS
• Mac OS X (10.4 or higher) / Windows XP
• Pro Tools TDM 7.2.1 software (or higher)
• Pro Tools HD or HD Accel hardware
• iLok USB key
• iLok.com account and internet access required for product authorization
• System must meet Digidesign’s system requirements for Pro Tools TDM systems!
Global Plug-In Controls
KEYBOARD COMMANDS
The TDM versions of MD3 & BrickWall Limiter supports keyboard commands for cer-
tain functions. The following key commands are available for all plug-in parameters:
Key Commands in Mac OS X:
Fine Adjust = Apple key + mouse movement
Reset To Default = Option + mouse click
Key Commands in Windows:
Fine Adjust = Ctrl + mouse movement
Reset To Default = Alt + Control + mouse click
AUTOMATION
Please be aware that automation of certain parameters, can cause audible artifacts.
In case you need to automate these parameters, you should take care that
changes only take place in parts where no audio is sent to the plug-in.