TC Electronic MD3 TDM - Manual (Page 11)

MD3-TDM / 9
EE
NN
GG
LL
II
SS
HH
EQ Page
INTRODUCTION
This digital EQ features a four-band parametric EQ with high- and low-pass filters
switchable between Notch, Parametric, Shelving and Cut filters. The needle sharp
notch filter has a range down to 0.01 octave and the shelving filters has a variable
slope, ranging from gentle 3 dB/oct over 6 and 9 to 12dB/oct. Cut filters are switch-
able between 12dB/oct maximum flat amplitude (Butterworth) or flat group delay
(Bessel) types. The parametric equalizer features a natural and well defined band-
width behavior at all gain and width settings:
BASIC OPERATION
• Press keys Lo, Mid1, Mid2 and Hi to activate/deactivate the EQ bands.
• Select Freq, Gain, Type or Lo/Hi to access all four parameters on individual bands.
• Press Bypass EQ to bypass all four bands.