TC Electronic MD3 TDM User Manual
Page 18
EE
NN
GG
LL
II
SS
HH
16 /
MD3-TDM
Ratio
Range: Off to Infinity
Specifies the Ratio of the performed compression.
Example: With a Ratio setting of 2:1 the compressor will reduce every 2dB above the
Threshold point to only 1dB.
Attack
Range: 0.3 to 100ms
The Attack time is the time the Compressor uses to reach the gain reduction specified
by the Ratio parameter.
Example: If the Input signal increases by 4dB above the set Threshold with a Ratio
set to 2:1 and the Attack time set to 20ms, the Compressor will use 20ms to reach a
Gain reduction of 2dB.
Release
Range: 20ms to 7s
The fallback time. The time it takes for the Compressor to release the attenuation of
the signal.
Meter Zoom
Press to zoom on the range of the Gain Reduction meters.
L/R
Press to view all algorithm parameters at the same time.