TC Electronic MD3 TDM - Manual (Page 14)

EE
NN
GG
LL
II
SS
HH
12 / MD3-TDM
Normalizer
When using the EQ section (located just before the Normalizer) the gain might have
been increased or decreased. The Normalizer is used to optimize the gain
before hitting the Expander/Compressor section.
Trim Left and Trim Right
Range: -6 to +18dB in 0.1dB steps
Level parameter between the EQ and Exp/Comp section.
When Input Mode is set to Stereo the parameters will be linked.
Soft clip
Range: +5dB; Off
The Soft clipper is placed between the Normalizer and Exp/Comp section. By enabling
the Soft clipper you are able to reduce potential overshoots.