Cobalt Digital COMPASS 9391 3G_HD_SD-SDI Timecode Burn-In Inserter - Manual (Page 25)

9391-TCB-OM (V1.3) 9391-TCB PRODUCT MANUAL 3-1
Chapter 3
Chapter 3
Operating Instructions
Overview
This chapter contains the following information:
• Control and Display Descriptions (p. 3-1)
• Accessing the 9391 Card via Remote Control (p. 3-5)
• Checking Card Information (p. 3-7)
• 9391 Function Submenu List and Descriptions (p. 3-8)
• Troubleshooting (p. 3-18)
Control and Display Descriptions
This section describes the user interface controls, indicators, and displays for
using the 9391 card. The 9391 functions can be accessed and controlled using
any of the user interfaces described here.
The format in which the 9391 functional controls, indicators, and displays
appear and are used varies depending on the user interface being used.
Regardless of the user interface being used, access to the 9391 functions (and
the controls, indicators, and displays related to a particular function) follows a
general arrangement of Function Submenus under which related controls can
be accessed (as described in Function Submenu/Parameter Submenu
Overview below).
After familiarizing yourself with the arrangement described in Function
Submenu/Parameter Submenu Overview, proceed to DashBoard™ User
Interface (p. 3-4).
Note: When a setting is changed, settings displayed on DashBoard™ are the
settings as effected by the 9391 card itself and reported back to the remote
control; the value displayed at any time is the actual value as set on the card.
If you are already familiar with
using DashBoard to control
Cobalt cards, please skip to
9391 Function Submenu List
and Descriptions (p. 3-8).