Important laser safety measures and notices, Safety measures for operation, Safety measures for maintenance and servicing – Cobalt Digital COMPASS 9215-EO-EM AES_EBU Fiber Audio Embedder User Manual
Page 5: Laser information

9215-EO-EM User Manual
••••
(V 1.1)
Page 5
Important Laser Safety Measures and Notices
Before using this product and any associated equipment, refer to the sections below so as to avoid
personnel injury and to prevent product damage. For further safety information when using fiber
products, consult the following publications:
•
IEC-60825- 2, Safety of Laser Products - Part 2: Safety of Optical Fiber
Communication Systems (OFCS) (for use outside of the U.S.A.)
•
ANSI Z136.2, Safe Use of Optical Fiber Communication Systems Utilizing Laser
Diode and LED Sources (for use in the U.S.A.)
Products may require specific equipment, and /or installation procedures be carried out to satisfy
certain regulatory compliance requirements.
Caution
— Before operating or servicing this product, all personnel should be familiar
with laser safety and fiber handling practices.
Safety Measures for Operation
During normal operation of this product, heed the following safety measures:
•
Do not stare at, or into, broken, or damaged, fibers.
•
Do not stare at, or into, optical connectors.
•
Only properly trained and authorized personnel should be permitted to perform
laser/fiber optic operations.
•
Ensure that appropriate labels are displayed in plain view and in close proximity to the
optical port on the protective housing/access panel of the terminal equipment.
Safety Measures for Maintenance and Servicing
Warning
— Do not use optical equipment, such as a microscope or an eye loupe, to
stare at the energized fiber end. Doing so may damage your eyes.
During maintenance and servicing of this product, only properly trained and authorized personnel
shall be allowed to use optical test or diagnostic equipment.
Laser Information
CLASS 1 LASER PRODUCT
IEC 60825-1:2007
Caution
— INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO
THE BEAM.