Overview, Features – Cobalt Digital COMPASS 9215-EO-EM AES_EBU Fiber Audio Embedder User Manual
Page 12

1-2
••••
Introduction
9215-EO-EM User Manual
••••
(V 1.1)
Overview
The 9215-EO-EM is a broadcast-quality embedder with one multi-rate SDI input which supports up to
16 channels of embedded audio and eight AES 75ohm unbalanced audio inputs. A single mode fiber
interface with an LC/UPC connector provides an SDI output.
The 9215-EO-EM can take in up to eight AES inputs and embeds them into any of the 16 possible
audio channels in an SD or HD-SDI output. If the input is a synchronous 48kHz signal, the audio will
be embedded into the SDI signal unaltered. If the input is not a synchronous 48kHz signal, it may be
converted using Sample Rate Conversion (SRC) before it is embedded on the SDI output.
The AES inputs have the following adjustments available: delay, gain, invert, and sum.
Card status and control parameters are displayed and configured using the DashBoard Control
System™.
Features
The 9215-EO-EM includes the following features:
•
Supports HD-SD SDI SMPTE-292M, 1.5Gbps and SMPTE 259M, 270Mbps
•
Supports AES-3id-2001, and EBU tech 3250
•
Audio embedding for all popular formats 480i, 576i, 720p, and 1080i
•
Embeds four audio groups with selection of primary and backup sources
•
Eight AES-3id 75ohm unbalanced inputs with SRC on DIN 1.1/2.3 connectors
•
One SDI processed output
•
Automatic input video format detection
•
SNMP support available
•
Input buffer with a bypass option
•
User defined loss of signal output
•
Audio controls such as gain, invert, delay, and sum
•
Internally generated test patterns and test tones
•
Reports status and configuration remotely via the DashBoard Control System™
•
Fits 20-slot frame
•
5-year transferable warranty