Cobalt Digital COMPASS 9034 Input Processing Analog to Digital Video - Manual (Page 24)

1
Technical Specifications
1-20 9034 PRODUCT MANUAL 9034-OM (V4.1)
Technical Specifications
Table 1-2 lists the technical specifications for the 9034 Input Processing
Analog to Digital Video Converter with Audio Embedding and Frame Sync
card.
Table 1-2 Technical Specifications
Item Characteristic
Note: HD specifications apply only to 9034; 9034-SD only accepts and outputs SD signals.
Part number, nomenclature • 9034 – Input Processing Analog to Digital Video Converter with
Audio Embedding and Frame Sync
• 9034-DEC – Input Processing Analog to Digital Video Converter
with Audio Embedding and Frame Sync and Dolby
®
Decoding
Option
• 9034-SD is functionally equivalent, but processes only SD
anlaog video with a resulting SMPTE 259M SDI output
Installation/usage environment Intended for installation and usage in frame meeting openGear
®
modular system definition.
Power consumption < 13 Watts (not including Dolby decoder)
Environmental:
Operating temperature:
Relative humidity (operating or storage): 32° – 104° F (0° – 40° C)
< 95%, non-condensing
Frame communication 10/100 Mbps Ethernet with Auto-MDIX.
Indicators Card edge display and indicators as follows:
• 4-character alphanumeric display
• Status/Error LED indicator
• Input Format LED indicator
Controls Card edge switches as follows:
• Menu Enter pushbutton switch
• Menu Exit pushbutton switch
• Up/down selection toggle switch
Internal Tone Generators Four built-in tone generators, each configurable for 18 discrete
sine wave frequencies ranging from 50 Hz to 16 kHz.
Generator source signal level is equivalent to -20 dBu.
Analog Video Input Input Complement:
Separate component Y/composite, Pr/C, and Pb inputs
Input Type:
Differential; Common Mode Rejection = 5 VAC