Cobalt Digital COMPASS 9086 Embedded Audio Loudness Processor - Manual (Page 62)

3
Troubleshooting
3-34 9086-SD PRODUCT MANUAL 9086-OM (V4.3)
9086 Card Edge Status/Error Indicators and Display
Figure 3-6 shows and describes the 9086 card edge status indicators and
display. These indicators and the display show status and error conditions
relating to the card itself and remote (network) communications (where
applicable). Because these indicators are part of the card itself and require no
external interface, the indicators are particularly useful in the event of
communications problems with external devices such as network remote
control devices.
Figure 3-6 9086 Card Edge Status Indicators and Display
4-Character Alphanumeric Display
Item Function
Alphanumeric
Display Displays 4-digit alphanumeric code indicating status or errors as follows:
• E0XX: Video Errors
• E002: Video Acquiring Lock
• E1XX: Audio Errors
RMT LED Blue LED flashes when 9086 is receiving control message from remote network control (e.g., DashBoard™
or Cobalt
® Remote Control Panel)
ERR LED Red LED illuminates when 9086 unable to lock to input standard.
Input Format
LEDs Four blue LEDs indicate the input signal raster format being received and locked onto by the 9086 (625,
525). Continuous cycling of the LEDs indicates the 9086 has not locked onto a particular format (as in the
case of no signal input).
RM
T
ERR 62
5
52
5 MENU DEPTH
Input Format
Indicators
Menu Depth
Indicators
Status
Indicators