Cobalt Digital COMPASS 9086 Embedded Audio Loudness Processor - Manual (Page 19)

9086-OM (V4.3) 9086-SD PRODUCT MANUAL 1-15
Introduction
Technical Specifications
Audio and Video Formats Supported by the 9086
Table 1-1 lists and provides details regarding the audio and video formats
supported by the 9086.
Technical Specifications
Table 1-2 lists the technical specifications for the 9086 Embedded Audio
Loudness Processor with Audio-Video Delay Correction card.
Table 1-1 Supported Audio and Video Formats
Item Description/Specification
Input / Output Video Raster Structure: Frame Rate:
486i
(1)
29.97
575i
(1)
25
Embedded Audio The 9086 supports all four groups (16 channels) of embedded audio at
full 24-bit resolution in both SD (with extended data packets).
(1) All rates displayed as frame rates; interlaced (“i”) field rates are two times the rate value shown.
Table 1-2 Technical Specifications
Item Characteristic
Part number, nomenclature 9086-SD/LP 2.0 – SD-SDI Stereo Loudness Processor with
Audio-Video Delay Correction
Installation/usage environment Intended for installation and usage in frame meeting openGear™
modular system definition.
Power consumption < 15 Watts maximum
Environmental:
Operating temperature:
Relative humidity (operating or storage): 32° – 104° F (0° – 40° C)
< 95%, non-condensing
Frame communication 10/100 Mbps Ethernet with Auto-MDIX.
Indicators Card edge display and indicators as follows:
• 4-character alphanumeric display
• Status/Error LED indicator
• Input Format LED indicator
Controls Card edge switches as follows:
• Menu Enter pushbutton switch
• Menu Exit pushbutton switch
• Up/down selection toggle switch