Moog Music MF-104Z Analog Delay - Manual (Page 16)

16
LONG
switch, the echo density is determined by the FEEDBACK
control, and the tuning of the echoes is determined by the MF-102
FREQUENCY
control and LO-HI switch. You'll also hear interesting
changes when you vary the MF-102 MIX, AMOUNT, and RATE
controls, and the waveform switch.
MF-104Z SETTINGS:
MIX 10
DELAY TIME 0.2 to 0.3
FEEDBACK 6 to 8
(Depends on exact setting of the LOOP GAIN control.)
Left Switch SHORT
Right Switch EXT.LOOP
MF-102 RING MODULATOR SETTINGS:
RATE
0.2 to 0.4
AMOUNT 5
MIX 10
FREQUENCY 240
Left Switch sine
Right Switch HI
CONNECTIONS:
• From MF-104Z LOOP OUT jack to MF-102 AUDIO IN jack.
• From MF-102 AUDIO OUT jack to MF-104Z LOOP IN jack.
• Sound source is plugged in to the MF-104Z AUDIO IN jack
• Amplifier is plugged in
to the MF-104Z MIX OUT
jack.
SWIRLING
ECHOES
(PHASER AND
ANALOG DELAY;
FIGURE 8)
Figure 8 - Setup for Swirling Echoes