Moog Music MF-107 FreqBox - Manual (Page 4)

4
GETTING STARTED RIGHT AWAY!
We have never known musicians who don’t want to try a new effect
out before reading the entire manual, so here is a quick guide to get you
started with your new FreqBox:
1) Inspect the carton and its contents: The MF-107 comes with the
Moogerfooger, a +9VDC, 300 mA, tip-positive power supply, and this
manual. Save the box and packing material in case you ever need to ship
your moogerfooger! Make sure that the power supply is rated for the line
Voltage of your country: 120 VAC for the USA, 100 VAC for Japan, or
220 VAC for Europe or most other countries.
2) Connections: Connect your instrument to the FreqBox AUDIO
INPUT. Connect the AUDIO OUTPUT
of the FreqBox to your amp. Connect
your Expression Pedal (such as the
Moog EP-1 or EP-2) to the FREQ input
(see figure 1). An expression pedal is
highly recommended, especially for
using the FreqBox with a guitar.
3) Set up the Front Panel/ Amp: Set
all the rotary controls on the FreqBox
as shown in figure 2. Make sure the
Figure 1 - Basic Connections
Figure 2 Basic Panel Setup
Expression pedal is in the heel
position. Turn down the volume of
your amplifier.
4) Power up/Bypass: Connect the
moogerfooger power supply to the
FreqBox power connector. The
Bypass indicator will light up. I
RED means the effect is OFF and
GREEN means the effect is ON.