beautypg.com

Moog Music MF-107 FreqBox User Manual

Page 26

background image

26

MF-107 SPECIFICATIONS

DESCRIPTION:

Analog effects module containing a VCO with continuously variable

waveform which can be hard synced and/or Frequency modulated by

the input signal and an Envelope Follower that can modulate the VCO

frequency.

FRONT PANEL FEATURES:

DRIVE rotary control - adjusts the gain of the audio input to the effect.

OUTPUT LEVEL rotary control - balances the level of the FreqBox’s

signal when the effect is on with the bypassed signal when the effect is

off.

MIX rotary control - adjusts the ratio of direct to effected signal when the

effect is on.

FREQUENCY rotary control - sets the VCO frequency from 25Hz-

1.6KHz

WAVEFORM rotary control - varies the VCO waveform continuously

from triangle to sawtooth to square to pulse.

ENVELOPE AMOUNT rotary control - adjusts the amount of envelope

follower CV modulating the VCO frequency

FM AMOUNT rotary control - adjusts the amount of input signal to

frequency modulate the VCO

LEVEL, a three-color LED that shows the level of the input signal.

BYPASS, a two-color indicator LED that tells whether the effect is active

or bypassed.

ON/BYPASS, a rugged, smooth-acting ‘stomp switch’.

REAR PANEL FEATURES:

AUDIO IN 1⁄4” phone jack – accepts any instrument-level or line-level

signal from –16 dBm to +4 dBm. Input impedance is 1 Megohm.

AUDIO OUT 1⁄4” phone jack - -4 dBm nominal maximum output level;

+10dBm absolute maximum output level. Output impedance is 1KOhms.

FREQ, WAVE, ENV.AMT, FM AMT, MIX, all of which are stereo 1⁄4”

jacks that accept moogerfooger EP1 (or equivalent) expression pedals, or

control voltages from two-circuit or three-circuit 1⁄4” jacks.

ENV.OUT CV output carries the unfiltered Envelope Follower CV

generated by the MF-107’s envelope follower. Nominal output ranges

from 0 to +5 Volts. This output only available when effect is ON

OSC. OUT CV output carries the VCO direct signal. The nominal output

level is 5 volts peak-to-peak.

+9V POWER INPUT jack – accepts +9VDC unregulated 300 mA power

adapter with positive center.