Grain Systems Unload Augers PNEG-1735 User Manual
Page 6
1. Safety
6
PNEG-1735 U-Trough Direct Gear Drive Bin Sweep Auger Unload Systems
Keep Hands Away from Moving Parts
DO NOT put hand or arm in hopper. Rotating auger can
crush and dismember.
DO NOT put any kind of tool inside hopper to try and clear
debris while the auger is running. Damage to the equipment
will result.
ALWAYS turn off and lock out all power sources before
servicing equipment.
Keep all shields and covers in place during operation.
Rotating Auger
Operate Motor Properly
To avoid serious injury or death, stay away from unit and make sure
everyone is clear of the equipment before starting or operating
the unit.
All electrical connections should be made in accordance with
the National Electric Code. Be sure equipment and bins are
properly grounded.
Do not operate electric motor equipped units until motors are
properly grounded.
Disconnect power on electrical driven units before resetting
motor overloads.
Do not repetitively stop and start the drive in order to free a plugged
condition. Jogging the drive in this manner can damage the
equipment and/or drive components.
Electric Shock Hazard
Prepare for Emergencies
Be prepared if fire starts.
Keep a first aid kit and fire extinguisher handy.
Keep emergency numbers for doctors, ambulance service,
hospital and fire department near your telephone.
Keep Emergency Equipment
Quickly Accessible