Grain Systems Unload Augers PNEG-1735 - Manual (Page 10)

10 PNEG-1735 U-Trough Direct Gear Drive Bin Sweep Auger Unload Systems
2. Decals
Safety Decal Location
The types of decals and locations on the equipment are shown below. Good safety requires that you
familiarize yourself with the various safety decals, the type of warning and the area or particular function
that related to the area, that requires your SAFETY AWARNESS.
SHEAR POINT
Keep hands clear of moving
parts. Do not operate with
guard removed. Disconnect
and lockout power before
servicing.
DC-994
SHEAR POINT
Keep hands clear of moving
parts. Do not operate with
guard removed. Disconnect
and lockout power before
servicing.
DC-995
WARNING
1. READ AND UNDERSTAND THE OPERATOR’S MANUAL
AND ALL SAFETY INSTRUCTIONS.
6. DO NOT ALLOW CHILDREN IN THE AREA OF OPERATION.
2. DO NOT OPERATE WHILE UNDER THE INFLUENCE OF
DRUGS OR ALCOHOL.
4. ALLOW ONLY TRAINED AUTHORIZED PERSONNEL IN
THE OPERATING AREA.
7. KEEP HANDS, FEET AND CLOTHING AWAY FROM
MOVING PARTS.
10. MAKE CERTAIN ALL ELECTRIC MOTORS ARE GROUNDED.
11. REPLACE ALL WORN OR DAMAGED LABELS IMMEDIATELY.
9. DISCONNECT POWER PRIOR TO RESETTING ANY
MOTOR OVERLOAD.
3. DO NOT OPERATE UNLESS ALL SAFETY EQUIPMENT,
SWITCHES, GUARDS AND SHIELDS ARE SECURELY IN
PLACE AND OPERATIONAL.
5. ANY ELECTRICAL WIRING OR SERVICE WORK MUST
BE PERFORMED BY A QUALIFIED ELECTRICIAN. IT MUST
MEET ALL STATE AND LOCAL ELECTRICAL CODES.
8. DISCONNECT AND LOCKOUT POWER BEFORE
MAKING ANY ADJUSTMENTS OR PERFORMING ANY
SERVICE WORK.
DC-1379
SHEAR POINT
Keep clear of rotating auger and
moving parts.
Do not remove or modify guards.
Disconnect and lock out power
before servicing.
Failure to do so will result in
serious INJURY or DEATH.
DC-1381
SHEAR POIN
T
Moving parts can
crush and cut. Keep
hands clear of
sprocket and chain.
DC-1386
WARNING
DC-994 DC-995
DC-1386
DC-1381 DC-1379