beautypg.com

Handrail posts and handrail angles – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-739 User Manual

Page 33

background image

PNEG-739 42" - 48" Platforms & Safety Cages

33

Distributor Platform Assembly

3

Locate the toe board cover plate and bolt over
the unused notched toe board area 5/16" x 1"
hex bolts. Attach handrail posts to the toe
boards as shown using the 5/16" x 1" hex bolts
provided. (Leave hardware loose until all
handrails are in place.) Attach all handrail
angles and brace angle 5/16" x 1" hex bolts.
(See Figure 3-5.) After all pieces have been
attached go back and tighten all hardware.

FIGURE 3-5

Handrail Posts and

Handrail Angles

FIGURE 3-5

Handrail Brace

Handrail Clip
Bracket

Toeboard Plate

Handrail Angles

Handrail Angles

Handrail Angles

Handrail Upright
Angle (5)