Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-739 - Manual (Page 17)

PNEG-739 42" - 48" Platforms & Safety Cages 17
42'' Head Service Platform
1
Attach platform hatch latch assembly, GSB30120,
to handrail as shown, using 5/16" x 1" hex bolts.
Locate all handrail angles and attach to the hand-
rail posts, as shown in Figure 1-7, using the
5/16" hardware. Attach the two deck channel sup-
port angles, HSP42014, to the rear of the head
angles and to the support channel through the
holes provided in the center decking uisng 3/8" x
1" hex bolts.
Handrail Angle - 38.63"
Handrail & Vertical
Support Angles
Handrail Angle - 167.289"
Deck Channel
Support Angle
Handrail
Angle - 120"
Handrail Angle -
50.625"
Latch
Assembly
FIGURE 1-7 FIGURE 1-7
Latch
Assembly