Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-739 - Manual (Page 18)

PNEG-739 42" - 48" Platforms & Safety Cages 18
42'' Head Service Platform
1
Attach the two HSP36027 handrail support clips
to the handrail uprights next to the head bearing
angle on the discharge end of head as shown in
Figure 1-8. Field drill the hole in each head bear-
ing angle and attach using the 5/16" x 1" hex bolts
supplied.
FIGURE 1-8
Handrail Retaining Clip
Handrail Retaining Clip
HSP42035
Handrail Upright Angle
Head Bearing Angle
FIGURE 1-8